Table of Contents
Advertisement
5.27.6 name
The name interface configuration command adds a name to a VLAN. To remove the VLAN name use the
no form of this command.
Syntax
name string
no name
string — Unique name, up to 32 characters in length, to be associated with this VLAN.
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The VLAN name should be unique.
Example
The following example names VLAN number 19 with the name "Marketing".
Console (config)# interface vlan 19
Console (config-if)# name Marketing
5.27.7 switchport mode
The switchport mode interface configuration command configures the VLAN membership mode of a
port. To reset the mode to the appropriate default for the device, use the no form of this command.
Syntax
switchport mode {access | trunk | general}
no switchport mode
access — Port belongs to a single, untagged VLAN.
trunk — Port belongs to 1..4063 VLANs, all tagged (except, optionally, for a single native VLAN).
general — Port belongs to 1..4063 VLANs, and each VLAN is explicitly set by the user as tagged
or untagged (full 802.1Q mode).
Advertisement
Table of Contents
