Show Dot1X - Planet WGSD-1022 User Manual

Examples
The following example sets the time for the retransmission of packets to the authentication server, to
3600 seconds.
console config-if(Config-VLAN)# dot1x timeout supp-timeout 3600

5.29.12 show dot1x

The show dot1x privileged EXEC command displays 802.1X status for the switch or for the specified
interface.
Syntax
show dot1x [ethernet interface]
interface —The full syntax is: unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X status for the switch.
console# show dot1x
802.1x is disabled
Admin
Port Mode
-------- ------------------ ------------- -------- ---------- -----------------
e1 Force Authorized
e2 Force Authorized
e3 Force Authorized
e4 Force Authorized
Oper Reauth
Mode Control Period
Authorized* Disabled 3600
Authorized* Disabled 3600
Authorized* Disabled 3600
Authorized* Disabled 3600
Reauth Username
n/a
n/a
n/a
n/a