Qos Map Dscp-Queue - Planet WGSD-1022 User Manual

Class map: C
Policer type: none
Committed rate: N/A
Committed burst: N/A
Exceed-action: N/A

5.17.7 qos map dscp-queue

The qos map dscp-queue global configuration command modifies the DSCP to queue map. To return to
the default map, use the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
• dscp-list—Specify up to 8 DSCP values, separate each DSCP with a space. (Range: 0 - 63)
• queue-id—Enter the queue number to which the DSCP value corresponds.
QoS Commands
qos trust (Global)
CONFIDENTIAL
Copyright © 2004 Marvell
January 19, 2004, Preliminary
Document Classification: Proprietary Information Page 147
Default Configuration
The following table describes the default map.
Command Mode
Global Configuration mode
User Guidelines
Queue settings for 3, 11, 19, ... cannot be modified.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
Console (config)# qos map dscp-queue 33 40 41 to 1
Doc. No. MV-S200005-00 Rev. C