Table of Contents
Advertisement
Example
The following example sets authentication when accessing higher privilege levels.
console (config) # aaa authentication enable default enable
5.3.3 login authentication
T
he login authentication line configuration c
r
emote telnet or console
no
form of this command.
S
yntax
l
ogin authentication {default | list-name}
n
o login authentication
default — Uses the default list created with the authentication login command.
list-name — Uses the indicated list created with the authentication login command.
Default Configuration
Uses the default set with the command authentication login.
Command Mode
Line Configuration mode
User Guidelines
Changing login authentication from default to another value may disconnect the telnet session.
Ex m
a
ple
The
fo lowing example specifies the default authentication me
l
console (config) # line cnsole
console (config-line) # login authentication default
5.3.4 enable auth
The enable authentication line configuration co
accessing a high
er privilege level from a remote telnet or console. To return to the default specified by the
enable authentication command, use the no form of this command.
ommand specifies the login authentication method list for a
. To return to the default specified by the authentication login command, use the
entication
thod for a remote Telnet or console.
mmand specifies the authentication method list when
Advertisement
Table of Contents
