Interface
IP address
------------
------------------------ ------------------
e1
10.7.1.102
g2
10.7.1.135
5.11 LACP Commands
5.11.1 lacp system-priority
The lacp system-priority global configuration command configures the system priority. To reset to
default, use the no form of this command.
Syntax
lacp system-priority value
no lacp system-priority
value — Value of the priority. (Range: 1 - 65535)
Default Configuration
The default system priority value is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
Console (config)# lacp system-priority 120
HW address
00:10:B5:04:DB:4B
00:50:22:00:2A:A4
status
--------
Dynamic
Static