Certificate was generated.
5.29 802.1x Commands
5.29.1 aaa authentication dot1x
The aaa authentication dot1x global configuration command specifies one or more authentication,
authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. Use the no
form of this command to return to default.
Syntax
aaa authentication dot1x default method1 [method2...]
no aaa authentication dot1x default
method1 [method2...] — At least one from the following table:
Keyword
Description
Radius
Uses the list of all RADIUS servers for authentication
None
Uses no authentication
Default Configuration
The default behavior of the "aaa authenctication" for dot1.x is "failed to authenticate". If the 8021.x calls
the AAA for authentication services it will receive a fail status.
Command Mode
Global configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an error, not if it
fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the
final method in the command line.
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Console (config)# aaa authentication dot1x default none