Redialing - Panasonic WORKIO DP-2310 Operating Instructions Manual

Redialing

Automatic Redialing
If a busy line is detected, the machine will redial the number up to 5 times at 3 minutes interval.
However, if a busy line is not detected, the machine will redial only one time. During that time, a
message will appear as shown to the right.
A file number is shown in the upper right hand corner of the display if it is a memory
transmission file.
Manual Redialing
You can also redial the last dialed number manually by pressing
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the
Platen Glass.
2
Press
OK
telephone number.
3
The document is stored into memory with a
file number. Then dials the last dialed
number.
NOTE
1. While the unit is displaying "WAITING TO DIAL", you can press
immediately.
Memory Transmit
Wait To Dial
SALES DEPT
AFRICA
APOLLO
BRAZIL
to confirm the displayed
Sending Documents
No.014
AMERICA ANTARTICA
ASIA BERLIN
key.
REDIAL
5551234
REDIAL
to start redialing
33