1414141414
4. Remove the screws from the hinges, 2 on each side.
5. Lift out the LCD assembly.
Top Cover
To remove the top cover, remove the hard disk drive (see
(see
Optical Disk
Drive), remove the keyboard (see Keyboard), remove the LCD assembly (see
Assembly), and then perform the following steps:
1. Carefully disconnect the speaker cable connector.
Fig. 23 Location of hinge screws.
Fig. 24 Location of speaker connector.
Packard Bell EasyNote ME Disassembly Manual
Hard Disk
Drive), remove the optical disk drive
14
LCD