Lcd Panel - Packard Bell EasyNote ME Disassembly Manual

2121212121
4. Remove the screw securing the inverter board.
5. Extract the inverter board.
6. Disconnect the cables from the inverter board (see

LCD Panel

To disassembly the LCD panel, first remove the LCD assembly (see
cover (see steps 1 - 3 in
1. Disconnect the cables from the inverter board (see
Note: It may be easier to remove the inverter board entirely to get better access to the cables (see
Board).
2. Remove the screw securing the grounding cable.
3. Lift out the LCD panel.
4. Remove the 4 screws on each side of the LCD brackets.
Fig. 37 Location of inverter board screw and connectors.
Inverter Board), and then perform the following steps:
Fig. 38 Location of screw securing grounding cable.
Packard Bell EasyNote ME Disassembly Manual
Fig 37).
LCD Assembly), remove the LCD
Fig 37).
21
Inverter