1818181818
Note: Ensure that you secure the modem cable tightly to the bottom cover to prevent damage or obstructing
the optical disk drive when inserting the drive.
Note: Keep the area next to the RJ11 connector (and DC jack) free, otherwise the top cover will not fit properly.
The area is meant for a speaker and the ferrites in the modem and DC jack cables (see
USB Board
To remove the USB board, first remove the top cover (see
steps:
1. Remove the 2 screws securing the HDD board.
2. Disconnect the cable from the USB board (see
3. Lift out the USB board.
Fig. 32 Location of USB board cable and screw.
Packard Bell EasyNote ME Disassembly Manual
Top
Cover), and then perform the following
Fig
32).
18
Fig
30).