Top Cover - Packard Bell EasyNote MT Disassembly Manual

1010101010
1. Remove the nine screws securing the keyboard cover. Note that four screws are located in
the battery compartment.
2. Turn the notebook over so the top is facing up and open the LCD completely.
3. Release the cover by prying it up along the top side of the cover.
4. Tilt the cover gently forward; there are six tabs holding the cover in place on the front.

Top Cover

To remove the top cover, remove the battery (see
Keyboard on page 8), remove the keyboard cover (see
perform the following steps:
1. Turn the notebook upside down.
2. Remove the screw securing the wireless LAN compartment cover.
3. Lift the cover diagonally upwards from the front left corner. There are two tabs holding the
cover in place on the back and the right. Raise the cover until you can remove it from the
casing.
Fig. 13 Location keyboard cover screws.
Fig. 14 Location of wireless LAN compartment cover screw.
Packard Bell EasyNote MT Disassembly Manual
Battery on page 4), remove the keyboard (see
Keyboard Cover on page 9), and then
10