66666
1.
Remove the 8 screws securing the memory compartment cover and remove the cover.
Release the metal clip on each side securing the memory module; the module will eject upwards.
2.
Carefully remove the module.
Note: In case two memory modules have been installed, you always have to remove the top module first
before you can remove the one underneath.
Wireless LAN Adapter
To remove the wireless LAN adapter, first remove the battery (see Battery) and then perform the following
steps:
1. Remove the 8 screws securing the wireless LAN compartment cover and remove the cover (see
Fig.
5).
Fig. 5 Removing memory compartment cover.
Fig. 6 Removing memory module.
Packard Bell EasyNote ME Disassembly Manual
6