Webcam; Wlan Antenna - Packard Bell EasyNote ME Disassembly Manual

2222222222
5. Remove the protective tape over the LCD cable.
6. Disconnect the LCD cable (see

Webcam

To remove the webcam, first remove the LCD assembly (see
(see steps 1 - 3 in Inverter
1. Disconnect the cable from the webcam.
2. Extract the webcam; it may be secured with glue and/or tape (see
Note: You may have to remove the LCD panel if you need to replace the webcam cable.

WLAN Antenna

To remove the wireless antenna, first remove the LCD panel (see
Fig. 39 Location of protective tape.
Fig 39).
Board), and then do the following:
Fig. 40 Location of webcam connector.
Packard Bell EasyNote ME Disassembly Manual
LCD Assembly), remove the LCD cover
Fig. 40).
LCD Panel), and then do the following:
22