CMOS Battery
1. Disconnect the CMOS battery cable from the system board.
2. Remove the CMOS battery.
Top Cover
1. Disconnect the touchpad flat cable from the LED board assembly
2. Disconnect the I/O cable from the LED board assembly
3. Remove the screw (B) securing the LED board assembly.
4. Remove the LED board assembly.
5. Remove the 3 screws (B) securing the ESB board to the top cover.
6. Lift the ESB board away from the top cover.
Fig. 26: Removing the CMOS battery
Fig. 27: Removing the LED board assembly
Packard Bell Easynote M3 Disassembly Manual
14