Table of Contents
Advertisement
1212121212
2. Carefully disconnect the flat cable from the main board (see
3. Lift out the button board.
4. Disconnect the flat cable from the button board.
Top Cover
To remove the top cover, remove the hard disks (see
drive (see
Optical Disk
then perform the following steps:
1. Carefully disconnect the speaker cables connector near the palm rest at the right.
Fig. 17 Location button board screws.
Fig. 18 Disconnecting flat cable.
Drive), remove the LCD panel assembly (see
Packard Bell EasyNote SJ Disassembly Manual
Fig.
17).
Hard Disk
Drive), remove the optical disk
LCD Panel
12
Assembly), and
Advertisement
Table of Contents
