Draytek VigorPro 5510 Series User Manual page 93

Address Type
Start IP Address
End IP Address
Subnet Mask
Invert Selection
Below is an example of IP objects settings.
VigorPro5510 Series User's Guide
Determine the address type for the IP address.
Select Single Address if this object contains one IP address
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet for
IP address.
Select Any Address if this object contains any IP address.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
83