Enable Application
Service
Application Name
Application
Virtual Network Computing – Choose this item for accessing and controlling a
remote PC through VNC protocol.
IP Address
Port
Scaling
VigorPro5510 Series User's Guide
Check this box to enable this application.
Type the profile name for the application.
Use the drop down list to choose an application applied to
this profile.
Different application type will lead different web pages.
Refer to the following:
Type the IP address for this protocol.
Specify the port used for this protocol. The default setting is
5900.
Chose the percentage (100%, 80%, 60%) for such
application.
219