Draytek VigorPro 5510 Series User Manual page 157

Wake by
IP Address
MAC Address
Wake Up
VigorPro5510 Series User's Guide
Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you
choose Wake by IP Address, you have to choose the correct IP
address.
The IP addresses that have been configured in LAN>>Bind
IP to MAC will be shown in this drop down list. Choose the
IP address from the drop down list that you want to wake up.
Type any one of the MAC address of the binded PCs.
Click this button to wake up the selected IP. See the following
figure. The result will be shown on the box.
147