Draytek VigorPro 5510 Series User Manual page 73

Protocol
Public IP
Private IP
Mask
Status
Click the index number link to open the configuration page.
Enable
Protocol
WAN IP
VigorPro5510 Series User's Guide
Display the protocol used for this address mapping.
Display the public IP address selected for this entry, e.g.,
172.16.3.102.
Display the private IP set for this address mapping, e.g.,
192.168.1.10
Display the subnet mask selected for this address mapping.
Display the status for the entry, enable or disable.
Check to enable this entry.
Specify the transport layer protocol. It could be TCP, UDP, or
ALL for selection.
Select an IP address (the selections provided here are set in IP
Alias List of Network >>WAN interface). Local host can use this
IP to connect to Internet.
If you want to choose any one of the Public IP settings, you must
specify some IP addresses in the IP Alias List of the Static/DHCP
Configuration page first. If you did not type in any IP address in
63