Draytek VigorPro 5510 Series User Manual page 166

SSL VPN
User Name
Password
Set SSL Web Proxy - It allows the remote dial-in user to
access internal web over SSL VPN, suitable for the
application through web only (e.g., HTTP). Click SSL
VPN>> SSL Web Proxy to set profiles.
If you haven't set any SSL VPN web proxy profiles, you will
see a link here. Click this link to access into the configuration
page of SSL VPN.
Note: SSL VPN can be applied in browser (e.g., IE) which
supports ActivateX only.
If you have set several profiles beforehand, you can check
SSL Web Proxy and choose the one(s) you need as SSL VPN.
To check if SSL Web Proxy is activated or not, please open
Draytek SSL VPN portal interface. From the web page, you
will see the message to indicate that you have the privilege for
the SSL Web Proxy.
Set SSL Application - If you've already set up SSL
application profiles, you'll see some check boxes here. Please
check the profiles that you want to enable for this account.
If you haven't set any SSL application yet, you'll see a
hyperlink here. Click the link, the system will lead you to
access SSL VPN > SSL Application for advanced
configuration.
This field is applicable when you select ISDN, PPTP or L2TP
with or without IPSec policy above.
This field is applicable when you select ISDN, PPTP or L2TP
156
VigorPro5510 Series User's Guide