Draytek VigorPro 5510 Series User Manual page 77

Call Filter
Data Filter
Filter
IM/P2P Filter
URL Content Filter
Web Content Filter
VigorPro5510 Series User's Guide
Check Enable to activate the Call Filter function. Assign a start
filter set for the Call Filter.
Check Enable to activate the Data Filter function. Assign a start
filter set for the Data Filter.
Select Pass or Block for the packets that do not match with the
filter rules.
Select an IM/P2P profile for global IM/P2P application blocking.
All the hosts in LAN must follow the standard configured in the
IM/P2P profile selected here. For detailed information, refer to
the section of IM/P2P profile setup. For troubleshooting needs,
you can specify to record information for IM/P2P by checking
the Log box. It will be sent to Syslog server. Please refer to
section 3.13.4 Syslog/Mail Alert for more detailed information.
Select one of the URL Content Filter profile settings (created in
CSM>> URL Content Filter) for applying with this router. Please
set at least one profile for choosing in CSM>> URL Content
Filter web page first. For troubleshooting needs, you can specify to
record information for URL Content Filter by checking the Log
box. It will be sent to Syslog server. Please refer to section 3.13.4
Syslog/Mail Alert for more detailed information.
Select one of the Web Content Filter profile settings (created in
CSM>> Web Content Filter) for applying with this router. Please
set at least one profile for anti-virus in CSM>> Web Content
67