Draytek VigorPro 5510 Series User Manual page 44

Details Page
D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
To use PPPoE as the accessing protocol of the internet, please choose Internet Access from
WAN menu. Then, select PPPoE mode for WAN. The following web page will be shown.
PPPoE Client Mode
ISP Access Setup
accessing the page to configure the settings.
There are three access modes provided for PPPoE, Static or
Dynamic IP and PPTP.
This button will open different web page according to the access
mode that you choose in WAN1 or WAN2.
P P o E
P P o E
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check Always
On.
Username – Type in the username provided by ISP in this field.
Password – Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup - You can type in four sets of time
schedule for your request. All the schedules can be set previously
34
VigorPro5510 Series User's Guide