Draytek VigorPro 5510 Series User Manual page 186

Detail Information
binding tunnel table can be established. TCP/UPD means
when the source IP, destination IP, destination port and
fragment conditions match with the settings specified here
and TCP/UDP Service Port also fits the number here, such
binding tunnel table can be established. ICMP means when
the source IP, destination IP, destination port and fragment
conditions match with the settings specified here and ICMP
Service Port also fits the number here, such binding tunnel
table can be established. IGMP means when the source IP,
destination IP, destination port and fragment conditions
match with the settings specified here and IGMP Service
Port also fits the number here, such binding tunnel table can
be established. Other means when the source IP, destination
IP, destination port and fragment conditions match with the
settings specified here with different TCP Service Port/UDP
Service Port/ICMP/IGMP, such binding tunnel table can be
established.
This field will display detailed information for Binding
Tunnel Policy. Below shows a successful binding tunnel
policy for load balance:
Note : To configure a successful binding tunnel, you have
to:
Type Binding Src IP range (Start and End) and
Binding Des IP range (Start and End) Choose YES or
NO for Binding Fragmented. If you choose YES for
Binding Fragmented, you don't need to choose
Binding Protocol.
Type Binding Src IP range (Start and End) and
Binding Des IP range (Start and End). Choose YES or
176
VigorPro5510 Series User's Guide