Draytek VigorPro 5510 Series User Manual page 140

In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Enable
Disable
Default TX limit
Default RX limit
Allow auto adjustment to
make the best utilization of
available bandwidth.
Limitation List
Start IP
End IP
Each/Shared
Click this button to activate the function of limit bandwidth.
nd
Subnet – if bandwidth limit function is
Apply to 2
enabled, please check this box to apply to second subnet.
Click this button to close the function of limit bandwidth.
Define the default speed of the upstream for each computer
in LAN.
Define the default speed of the downstream for each
computer in LAN.
Router will detect if there is enough bandwidth remained for
using according to the bandwidth limit set by the user. If yes,
the router will adjust the available bandwidth for users to
enhance the total utilization.
Display a list of specific limitations that you set on this web
page.
Define the start IP address for limit bandwidth.
Define the end IP address for limit bandwidth.
Select Each to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX
limit fields; select Shared to make all the IPs within the
range of Start IP and End IP share the total bandwidth of TX
130
VigorPro5510 Series User's Guide