Wired Vlan - Draytek VigorPro 5510 Series User Manual

3 . 1 4 . 1 W i r e d
3 . 1 4 . 1 W i r e d
PCs connected to Ethernet ports of the router can be divided into different groups and
formed VLAN. PCs under the same groups can share each other information through the
router and will not be peeked by other groups.
The VLAN >> Wired VLAN allows you to configure VLAN settings through wired
connection to achieve the above intention. Simply check P1 and P2 boxes on the line of
VLAN0; and check P3 and P4 boxes on the line of VLAN1.
Enable
P1 – P4
VLAN0-3
VigorPro5510 Series User's Guide
V L A N
V L A N
Check this box to enable this function (for VLAN
Configuration).
Check the box to make the computer connecting to the port
being grouped in specified VLAN. Be aware that each port
can be grouped in different VLAN at the same time only if
you check the box. For example, if you check the boxes of
VLAN0-P1 and VLAN1-P1, you can make P1 to be grouped
under VLAN0 and VLAN1 simultaneously.
This router allows you to set 4 groups of virtual LAN.
209