Management - Draytek VigorPro 5510 Series User Manual

3 . 1 6 . 7 M a n a g e m
3 . 1 6 . 7 M a n a g e m
This page allows you to manage the settings for access control, access list, port setup, and
SNMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Allow management from
the Internet
Disable PING from the
Internet
External Device Auto
Discovery
Access List
User Define Ports
Default Ports
Enable SNMP Agent
Get Community
e n t
e n t
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet. Check
the box(es) to specify.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by default.
Check the checkbox to detect external devices connected to
current router automatically.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
Check to specify user-defined port numbers for the Telnet and
HTTP servers.
Check to use standard port numbers for the Telnet and HTTP
servers.
Check it to enable this function.
Set the name for getting community by typing a proper
character. The default setting is public.
232
VigorPro5510 Series User's Guide