Active Data Connections; Sync - Vertu Constellation Quest Reference Manual

Connectivity
WLAN settings
Select Menu > Ctrl. Panel > Settings > Connection > Wireless LAN.
To have an indicator displayed when there is a Wireless LAN
Show WLAN
(WLAN) available in your current location, select Show
availability
WLAN availability > Yes.
Scan for networks To select the interval for your device to scan for available
WLANs and to update the indicator, select Scan for
networks. This setting is not available unless you select
Show WLAN availability > Yes.
To set the device to test the Internet capability of the selected
Internet
WLAN automatically, to ask for permission every time, or to
connectivity test
never perform the connectivity test, select Internet
connectivity test > Run automatically, Ask every time, or
Never run. If you select Run automatically or allow the test
to be performed when the device asks for permission, the
access point is saved to Internet Destinations when the
connectivity test is performed successfully.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# on the home screen. The MAC address is displayed.
86

Active data connections

Select Menu > Ctrl. Panel > Connectivity > Conn. mgr.
Select Active data connections.
In the active data connections view, you can see the open data connections:
Packet data connections
Wireless LAN (WLAN) connections.
NOTE: The actual bill for calls and services from your service provider may
vary, depending on network features, rounding off for billing, taxes, and so
forth.
• To end a connection, select Options > Disconnect.
• To close all open connections, select Options > Disconnect all.
• To view the details of a connection, select Options > Details.

Sync

Select Menu > Ctrl. Panel > Phone > Sync.
Sync. allows you to synchronize your notes, calendar entries, text and multimedia
messages, browser bookmarks, and contacts with various compatible applications
on a compatible computer and over the Internet.
You may receive synchronization settings in a special message from your service
provider.
A synchronization profile contains the necessary settings for synchronization.
When you open the Sync. application, the default or previously used sync profile is
displayed. To modify the profile, scroll to a sync item, then select Mark to include it in
the profile or Unmark to leave it out.
• To manage sync profiles, select Options and the desired option.
• To synchronize data, select Options > Synchronize. To cancel synchronization
before it finishes, select Cancel.
Normally synchronization is with your PC using Ovi Suite.