Cell Broadcast; Messaging Settings - Vertu Constellation Quest Reference Manual

Send service commands
You can send a service request message (also known as a USSD command) to your
service provider and request activation of certain network services. Contact your
service provider for the service request text.
To send a service request message, select Messaging > Options > Service
commands. Enter the service request text, then select Options > Send.

Cell broadcast

Select Messaging and Options > Cell broadcast.
With the cell broadcast network service, you can receive messages from your service
provider on various topics, such as weather or traffic conditions in a particular region.
For available topics and relevant topic numbers, contact your service provider. Cell
broadcast messages cannot be received when the device is in remote SIM mode.
A packet data (GPRS) connection may prevent cell broadcast reception.
Cell broadcast messages cannot be received in UMTS (3G) networks.
• To receive cell broadcast messages, you may need to turn cell broadcast
reception on. Select Options > Settings > Cell broadcast > Reception > On.
• To view messages related to a topic, select the topic.
• To receive messages related to a topic, select Options > Subscribe.
TIP: You can set important topics as "hot topics". You are notified on the
home screen, when you receive a message related to a hot topic. Select a
topic and Options > Hotmark.
• To add, edit, or delete topics, select Options > Topic.
Text messages on the SIM card
Text messages may be stored on your SIM card. Before you can view SIM messages,
you must copy the messages to a folder in the device. After copying the messages to
a folder, you can view them in the folder or delete them from the SIM card.
1. Select Messaging and Options > SIM messages.
2. Select Options > Mark/Unmark > Mark or Mark all to mark every message.
3. Select Options > Copy.
4. Select a folder and OK to begin copying.
To view SIM card messages, open the folder where you copied the messages, then
open a message.

Messaging settings

Select Messaging and Options > Settings.
Open the message type in question, then define all fields marked with Must Be
Defined or a red asterisk.
Your device may recognize the SIM card provider and automatically configure the
correct text message, multimedia message, and GPRS settings. If not, contact your
service provider for the correct settings, request the settings from your service
provider in a configuration message, or use the Settings wizard application.
Messages
61