Vertu Constellation Quest Reference Manual page 122

Maps
When you select Drive Home or Walk Home for the first time, you are prompted to
define your home location. To later change the home location, do the following:
1. In the main view, select Options > Settings > Navigation > Home location >
Change > Redefine.
2. Select the appropriate option.
TIP: To walk without a set destination, select Map. Your location is
displayed in the center of the map as you move.
Plan a route
Plan your journey, create your route, and view it on the map before setting off.
Select Menu > Maps and My position.
To create a route:
1. Go to your starting point.
2. Press the Middle Select key, then select Add to route.
3. To add another route point, select Add new route point and the appropriate
option.
To change the order of the route points:
1. Go to a route point.
2. Press the Middle Select key, then select Move.
3. Go to the place where you want to move the route point to, then select OK.
To edit the location of a route point:
Go to the route point, press the Middle Select key, then select Edit and the
appropriate option.
To view the route on the map:
Select Show route.
To navigate to the destination:
Select Show route > Options > Start driving or Start walking.
122
To change the settings for a route:
The route settings affect the navigation guidance and the way the route is displayed
on the map.
1. In the route planner view, open the Settings tab. To get to the route planner view
from the navigation view, select Options > Route points or Route point list.
2. Set the transportation mode to Drive or Walk. If you select Walk, one-way streets
are regarded as normal streets, and walkways and through routes, such as parks
and shopping malls, can be used.
3. Select the desired option.
To select the walking mode:
Select Settings > Walk > Preferred route > Streets or Straight line. Straight Line
is useful on off-road terrain, as it indicates the walking direction.
To use the faster or shorter driving route:
Open the Settings tab, then select Drive > Route selection > Faster route or
Shorter route.
To use the optimized driving route:
Open the Settings tab, then select Drive > Route selection > Optimized.
The optimized driving route combines the advantages of both the shorter and faster
routes.
You can also choose to allow or avoid using, for example, expressways, toll roads, or
ferries.