Network - Vertu Constellation Quest Reference Manual

Call functions and Call Log
Call duration display
This feature displays the call duration during each call.
To activate the Show call duration feature:
1. Select Menu
>
Ctrl. panel
2. Select On.
Summary after call
This feature displays the call duration after each call.
To activate the Summary after call feature:
1. Select Menu
>
Ctrl. panel
2. Select On.
Send my caller ID
This feature allows call recipients to view your phone number on their phones when
you call them.
To change the caller ID setting:
1. Select Menu
>
Ctrl. panel
2. Select one of the following options:
• Set by network To use the default setting supplied by your service provider.
-
• Yes - To show your phone number to all call recipients.
• No - To hide your phone number from all call recipients.
44
Settings > Phone > Call > Show call duration.
>
Settings > Phone > Call > Summary after call.
>
Settings > Phone > Call > Send my caller ID.
>

Network

Settings > Phone > Network
> >
Menu Ctrl. panel
Networks allows you to select the network type and selection method and indicate
when to use your phone in microcellular networks.
To select the type of network to use, select Network mode. Select the network type,
then select OK. This setting may be preset for your phone, and you may not be able
to select it.
To define how to choose between different available networks, select Operator
selection > Options > Change > Automatic or Manual.
Select Manual if you know that a network is less expensive or transmits data faster
than another.
To indicate when to use your phone in a microcellular network (MCN), select Cell
info display > Options > Change > On. The MCN indicator is only displayed in
standby mode.
Note that in a microcellular network, local calls can cost less.
To change the network settings:
1. Select Menu Settings > Phone > Network
> >
Ctrl. panel
2. Select one of the following options:
• Network mode Select the type of network to use; options include Dual Mode,
-
UMTS (3G), and GSM.
• Operator selection - Options are Automatic or Manual.
• Cell info display - Options are On or Off.
3. To save your settings, select Back.
Note that the available options may vary.
.