Data Cable - Vertu Constellation RM-389V User Manual

Always charge the battery until it is fully charged. When the battery
is fully charged, the battery charge indicator stops animating and, if
your Vertu phone is switched on, a
pl e a s e un p lu g th e cha rg e r
displayed.
If your Vertu phone is not charging, try the following:
Disconnect the charger from the AC outlet.
>
Check that the electrical rating of the AC outlet is compatible with
>
your charger.
Verify that the AC outlet has power and that it is switched on. For
>
example, in many hotel rooms, AC outlets are used for lighting and
may be switched on and off from remote locations in the room.
Wait for at least 10 seconds and then reconnect the charger to the
>
AC outlet.
Use another nearby AC outlet that you know is providing power.
>
If charging still fails, contact Vertu Concierge for further advice.
>

Data cable

The micro-USB data cable transfers data between your Vertu phone
and a compatible computer, for example when you are using Vertu
PC Suite, and between your Vertu phone and a compatible printer
supporting PictBridge.
A t t ach i n g t h e d at a c a b l e to t he ph o n e
c o n n e c t o r
A t t ach i n g t h e d at a c a b l e to t he c om p ut e r
P ho n e is fu lly ch arg e d,
confirmation message is briefly
Carefully insert the micro-
USB end of the data cable
into the phone connector.
Please ensure that the
connector is inserted
correctly, with the connector
symbol uppermost.
Insert the USB end of the
data cable into the
computer's USB connector.
English
60
ACCESSORIES