Vertu Constellation Quest Reference Manual page 25

Clock
The clock has the following features:
• Displays time and date in either analog or digital format.
• Displays alarms set for the next 12 hours (analogue display only).
• Displays free and busy periods taken from the Calendar, around the clock bezel
(analog display only)
• Uses the automatic time feature to keep accurate time.
• Displays the local time or, if you are roaming, displays both the local time and the
time in your home location.
WARNING: The date and time are normally set by the automatic time
feature and should not be tampered with.
Analog Clock, showing local time and home time (digital)
Digital Clock showing local time in the large digits and home time in small digits.
Clock alarms and appointments
The clock, alarm and the world clock are all accessed via the clock, from the Home
screen
To change the clock time and set alarms on the home screen
To access the clock, scroll to the left or right to highlight the clock, then press the
Middle Select key.
The Clock application appears with emphasis on the current Time.
Use the Left and Right scroll keys to display one of the three options: Time, Alarms,
and World clock.
To change the date and time settings from the main menu
Clock, date, and time settings are accessed as follows.
From the Menu > Ctrl. Panel > Settings > General > Date and time, or
Menu > Ctrl. Panel > Clock > Options > Settings.
Change the settings as necessary.
Clock – Alarms
To set an alarm:
1. With the Clock application open, in either the Time or Alarms tab, select
Options > New alarm.
2. Scroll to Alarm time:, then select the time for the alarm.
3. Scroll to Description, then change the alarm text, if desired.
4. Scroll to Repeat. By default, the alarm is set to Within 24 hrs, which means the
alarm is only valid during the next day. Press the Middle Select key and select an
alternative option, if desired; the alarm can be repeated daily, weekly, on
workdays, or not repeated.
5. Press Done to save the alarm. Set additional alarms, if desired.
6. The display shows when the next alarm is due to activate.
Any meetings or appointments set are displayed in the analog clock, as shown below.
Analog clock showing alarm at 7 o'clock.
Home Screen and Clock
25