Altigen MaxAgent Manual page 73

If you choose Enable schedule based access, you can set up to four
different schedules in the dialog box that pops up:
3. Check the Enable Call Screening check box if you want the system
to prompt the ONA caller to record a caller name to continue ONA.
4. If you want, check the Verify Caller ID based on the following check
box and then specify the incoming phone numbers for ONA. If ONA
finds one of these numbers on an incoming call, it will forward the call
to you.
You can enter up to 10 phone numbers in the Caller ID Verification
fields. For local numbers, use 7 digits (5555555). For long distance
numbers, use 10 digits—area code + local number.
Note: If you enter no numbers in the Caller ID Verification fields and
ONA is enabled, ONA is made available to every caller.
Using a Password
You can use a Caller ID Verification field to enter a password number
such as "5555" so that a caller who knows this password can use
ONA to find you, regardless of where they are calling from. Tell the
caller to dial 1 during your personal greeting and then enter the pass-
word.
5. Enter the Forwarding Numbers to be used by the system to find you
when ONA is active. You can set up to four different numbers—
extensions or outside numbers. For outside numbers, use the
drop-down list to select the trunk access code you want to use. Specify
whether the number is an extension or outside number and if a
password is required.
Check a Schedule
box and choose the
times you want to be
available for ONA
from the drop-down
lists.
MaxAgent Manual 67