Top Site Service Settings; Figure 216 Top Site Service Settings; Table 165 Top Site Service Settings - ZyXEL Communications Vantage CNM User Manual

Vantage CNM User's Guide
Table 164 All Services Top Users (continued)
List Top 10
Last Days
Settings
Source IP
Color
Events
MBytes
% of MBytes
Total

25.6.2 Top Site Service Settings

Click Settings in the previous screen to view reports for more sites visited, or for days (up to
31 days) than the previous list box allows or for an earlier time range.

Figure 216 Top Site Service Settings

Table 165 Top Site Service Settings

LABEL
User Number
Chart Type
Start Date
End Date
Apply
Cancel
345
Select the number of users to view from the drop-down list box
The report displays information per hour when you select one day and information
per day when you select more than one day.
Click Settings to view reports for more users, or for days (up to 31 days) than the
previous list box allows or for an earlier time range.
This field displays the source IP address (user) that used a service(s), through a
ZyXEL device(s) during each hour of the current day or each day for a range of days
(up to 31 days).
You can color code individual items for better graphical representation.
This field displays the number of events or "hits."
This field displays the number of megabytes consumed by the service(s).through the
selected ZyXEL device(s) in the last hour or day.
This field shows the percentage of megabytes consumed by the service(s) during
this hour, compared to the whole day when one day is is selected. It shows the
percentage of megabytes consumed by the service(s) during this day, compared to
the total number of days selected when more than one day is selected.
This field displays totals for measurable items in this screen.
DESCRIPTION
Type the number of users you'd like to view here.
Select PIE or BAR chart from the Chart Type list box. You can select the default for all
screens in the Report, System, General Config screen.
Click the calendar icon to select a beginning year-month-date or manually enter the
date in year-month-date format.
Click the calendar icon to select an ending year-month-date or manually enter the date
in year-month-date format. The end date must come after the start date but not after
the current date. The total range must not exceed 31 days.
Click Apply to create a report based on the settings you configured in this screen.
Click Cancel to close this screen without saving your settings.
Chapter 25 Service Reports