Figure 200 Service Settings; Table 150 Service Settings - ZyXEL Communications Vantage CNM User Manual

Figure 200 Service Settings

Table 150
LABEL
Add a known service
Add a custom service Fill in the following fields to specify a TCP/UDP service that is not pre-defined.
Name
Port range
Protocol
Custom service
Add
Delete
Chapter 25 Service Reports
Service Settings
DESCRIPTION
Select a pre-defined service from the drop-down list box or select Custom
Service and then fill in the Add a custom service fields to create a custom
service.
Enter a unique name to identify this service.
Enter a port range (start port to end port in ascending order) that is not already in
use to define your service. Enter the same start and end port if the service is
defined by one port. If you select a port range already in use, you see the
following screen.
tcp, udp
Select from
This text box lists all pre-defined and custom services. These are the services
that then display in the Service Monitor screen.
You can edit a custom port by selecting it here and then modifying the Port range
and Protocol fields. You cannot edit a pre-defined service.
Click either a pre-defined service or create a custom port and then click this
button to add it to the "Custom service" list box.
Click a service in the "Custom service" list box and then click this button to
remove it. If you remove a custom port, you will have to recreate it later if you
need it again.
tcp/udp
or to define your service.
Vantage CNM User's Guide
328