ZyXEL Communications Vantage CNM User Manual page 122

Vantage CNM User's Guide
Table 34 Configuration > WAN > ISP (PPTP) - ZyWALL (continued)
LABEL
Retype to confirm
Password
Nailed-up Connection
Idle Timeout
My IP Address
My IP Subnet Mask
Server IP Address
Connection ID/Name
Apply
Reset
121
DESCRIPTION
Type your password again to make sure that you have entered it correctly.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in seconds that elapses before the ZyXEL device
automatically disconnects from the PPTP server.
Type the (static) IP address assigned to you by your ISP.
The ZyXEL device will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the ZyXEL device.
Type the IP address of the PPTP server.
Type your identification name for the PPTP server.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
Chapter 8 Configuration > WAN