Figure 68 Configuration > Wan > Dial Backup > Edit - Zywall; Table 38 Configuration > Wan > Dial Backup > Edit - Zywall - ZyXEL Communications Vantage CNM User Manual

Figure 68 Configuration > WAN > Dial Backup > Edit - ZyWALL
The following table describes the fields in this screen
Table 38 Configuration > WAN > Dial Backup > Edit - ZyWALL
LABEL
Get IP Address
Automatically from
Remote Server
Used Fixed IP Address
My WAN IP Address
Remote Node IP
Address
Remote IP Subnet Mask Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router
Chapter 8 Configuration > WAN
DESCRIPTION
Type the login name assigned by your ISP for this remote node.
Select this check box if your ISP assigned you a fixed IP address, and then
enter the IP address in the following field.
Leave the field set to 0.0.0.0 (default) to have the ISP or other remote router
dynamically (automatically) assign your WAN IP address if you do not know it.
Type your WAN IP address here if you know it (static). This is the address
assigned to your local ZyXEL device, not the remote router.
Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router
dynamically (automatically) send its IP address if you do not know it. Type the
remote gateway's IP address here if you know it (static).
dynamically send its subnet mask if you do not know it. Type the remote
gateway's subnet mask here if you know it (static).
Vantage CNM User's Guide
130