Adding A Component Bb: E-Mail Type; Figure 138 Building Block > Component Bb > Add > Ip Address; Figure 139 Building Block > Component Bb > Add > E-Mail Address; Table 108 Building Block > Component Bb > Add > Ip Address - ZyXEL Communications Vantage CNM User Manual

Figure 138 Building Block > Component BB > Add > IP Address
The following table describes the fields in this screen
Table 108 Building Block > Component BB > Add > IP Address
TYPE
IP Type
Start IP
End IP/Subnet Mask
Apply
Reset

18.5.1.2 Adding a Component BB: E-mail Type

If you select E-mail in the Type field in the BB Info screen and select Next, you will to the
next screen, where you must enter your E-Mail Address.
Figure 139 Building Block > Component BB > Add > E-Mail Address
The following table describes the fields in this screen
Table 109 Building Block > Component BB > Add > E-Mail Address
TYPE
E-mail Address
Apply
Reset
Chapter 18 Building Blocks (BBs)
DESCRIPTION
Select from Single, Range or Subnet.
Type the IP address or the first IP address in a range.
Type the last IP address in a range or the subnet mask. See the appendices
for information on IP subnetting
Click Apply to create the BB. This BB is then displayed in the component BB
summary screen.
Click Reset to begin configuring the screen afresh.
DESCRIPTION
Type the e-mail address in standard you@here.xx format.
Click Apply to create the BB. This BB is then displayed in the
component BB summary screen.
Click Reset to begin configuring the screen afresh.
Vantage CNM User's Guide
262