Adding A Component Bb; Adding A Component Bb: Ip Type; Figure 137 Building Block > Component Bb > Add; Table 107 Building Block > Component > Add - ZyXEL Communications Vantage CNM User Manual
Centralized network management
Hide thumbs
Also See for Vantage CNM:
- User manual (433 pages) ,
- Quick start manual (36 pages) ,
- Quick start manual (127 pages)
Table of Contents
Advertisement
Vantage CNM User's Guide
Table 106 Building Block > Component BB (continued)
TYPE
Type
Note
Add
Delete
18.5.1 Adding a Component BB
Click Add in
Figure 137 Building Block > Component BB > Add
The following table describes the fields in this screen
Table 107 Building Block > Component > Add
TYPE
Name
Type
Note
Next
Cancel
18.5.1.1 Adding a Component BB: IP Type
If you select IP in the Type field in the BB Info screen and select Next, you will to the next
screen, where you must enter your IP Type, Start and End IP/Subnet Mask details.
261
DESCRIPTION
This field displays the component type, for example, E-mail.
This field displays some extra description of the BB
Click Add to create a new configuration BB. Alternatively, create new component BBs
directly from the configuration menus by using the "save as new BB" icon.
Click to delete a selected device BB.
Figure 136 on page 260
DESCRIPTION
Type a unique name for the building block.
Select from IP, E-mail, VPN1.1d_IPSec, VPN1.1d_IKE or VPN1.0..
Type some extra description of the BB
Click Next to proceed to the next screen.
Click Cancel to return to the previous screen without saving any changes.
to create a brand new component BB.
Chapter 18 Building Blocks (BBs)
Advertisement
Table of Contents
