Servers; Figure 156 System > Preferences > User Access; Table 122 System > Preferences > User Access - ZyXEL Communications Vantage CNM User Manual

Vantage CNM User's Guide
Figure 156 System > Preferences > User Access
The following table describes the fields in this screen.
Table 122 System > Preferences > User Access
LABEL
Max Count of Users Online Type the maximum number of administrators allowed to log into Vantage
Admin Idle Activity
Timeout
Brute Force Password
Protection
Allowed Attempts Before
Failure
Wait Interval Between
Failure
Force Administrator
Password Change every
Apply
Reset

20.4.3 Servers

You can configure these servers as you install Vantage (in the installation wizard) or after you
install it in this screen.
Configure the Vantage CNM public IP server address, FTP server (for firmware upload),
syslog server (for logs) and mail server (for Vantage notifications and reports) in this screen.
These IP addresses will be the same as the Vantage server computer if they are all on the same
computer.
The FTP server is used for file transfers, such as firmware upgrade.
287
DESCRIPTION
at any one time.
Type the length of time an Administrator can leave the Vantage web
configurator idle before he is automatically logged out.
Configure the next two fields to apply this.
Type the number of times an incorrect password may be entered before a
login failure is returned.
Type the wait time before allowing another login in after a login failure is
returned.
Type how often all Administrators must change their Vantage login
passwords. If an Administrator does not change her password within this
time, then the old password expires.
Click Apply to save your settings in Vantage.
Click Reset to begin configuring the screen afresh.
Chapter 20 Other System Screens