ZyXEL Communications Prestige 650ME User Manual page 167

FIELD
Weekday: If you selected Weekly in the How Often field above, then select
the day(s) when the set should activate (and recur) by going to
Day
that day(s) and pressing [SPACE BAR] to select Yes, then press
[ENTER].
Start Time Enter the start time when you wish the schedule set to take effect
in hour-minute format.
Duration Enter the maximum length of time this connection is allowed in
hour-minute format.
Forced On means that the connection is maintained whether or
Action
not there is a demand call on the line and will persist for the time
period specified in the Duration field.
Forced Down means that the connection is blocked whether or
not there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a
demand call on the line. Disable Dial-On-Demand means that
this schedule prevents a demand call on the line.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE in
the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.
Call Scheduling
Table 14-1 Schedule Set Setup Fields
DESCRIPTION
Prestige 650ME ADSL Bridge
EXAMPLE
Yes
No
N/A
09:00
08:00
Forced On
14-3