Table of Contents
Advertisement
Prestige 650ME ADSL Bridge
3.11 IP Address Assignment
A static IP is a fixed IP that your ISP gives you. A dynamic IP is not fixed; the ISP assigns you a different
one each time. The Single User Account feature can be enabled or disabled if you have either a dynamic or
static IP. However the encapsulation method assigned influences your choices for IP Address and ENET
ENCAP Gateway.
3.11.1 Using PPPoE Encapsulation
If you have a dynamic IP, then the IP Address and ENET ENCAP Gateway fields are not applicable (N/A).
If you have a static IP, then you only need to fill in the IP Address field and not the ENET ENCAP
Gateway field.
3.11.2 Using RFC 1483 Encapsulation
In this case the IP Address Assignment must be static with the same requirements for the IP Address and
ENET ENCAP Gateway fields as stated above.
3.12 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPPoA or
PPPoE encapsulation, then the only ISP information you need is a login name and password. You only need
to know the Ethernet Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
FIELD
System Name
Encapsulation
Multiplexing
My Login
My Password
3-12
Table 3-4 Internet Account Information
DESCRIPTION
Name of the Prestige (optional).
PPPoE or RFC1483.
LLC-based or VC-based. If this information is not
given, use the default.
Enter the login name assigned by your ISP (for
PPPoE only).
Enter the password associated with your ISP assigned
My Login (for PPPoE only).
YOUR INFO
Internet Access
Advertisement
Table of Contents
Troubleshooting
