Traffic Redirect Setup; Figure 4-6 Menu 11.1 - Remote Node Profile; Table 4-3 Menu 11.1 - Remote Node Profile (Traffic Redirect Field) - ZyXEL Communications Prestige 650ME User Manual

Prestige 650ME ADSL Bridge
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= studerus_adsl@bluewin.ch
My Password= ********
Authen= CHAP/PAP
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
Table 4-3 Menu 11.1 – Remote Node Profile (Traffic Redirect Field)
FIELD
Edit Traffic Press [SPACE BAR] to select Yes and press [ENTER] to configure
Menu 11.7 – Traffic Redirect Setup.
Redirect
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press
[ESC] at any time to cancel.

4.4.2 Traffic Redirect Setup

Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using Menu 11.7 – Traffic Redirect Setup.
4-10
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Figure 4-6 Menu 11.1 – Remote Node Profile
DESCRIPTION
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Remote Node Configuration
EXAMPLE
No