UDP and TCP packets can be routed. In addition, partial ICMP, including echo and traceroute, is
supported.
3.11.2 Single User Account Configuration
The steps for configuring your Prestige for Single User Account are identical to the conventional Internet
access with the exception that you need to fill in two extra fields in Menu 4 - Internet Access Setup, as
shown below.
SUA
Figure 3-6 Menu 4 – Internet Access Setup for Single User Account
To enable the SUA feature in Menu 4, move the cursor to the Single User Account field and select Yes (or
No to disable SUA). Then follow the instructions on how to configure the SUA fields.
Field
Single User Account
IP Addr. If your ISP did not assign you a static IP address, enter
Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration, or
press [Esc] at any time to cancel.
Internet Access
Prestige 642 ADSL Internet Access Router
Menu 4 - Internet Access Setup
ISP's Name= 1
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 10
VCI #= 10
My Login= N/A
My Password= N/A
Single User Account= No
IP Address Assignment= Static
IP Address= 192.168.1.100
ENET ENCAP Gateway= 192.168.1.1
Press ENTER to Confirm or ESC to Cancel:
Table 3-5 Single User Account Menu Fields
Description
Select Yes to enable SUA.
[0.0.0.0] here; otherwise, enter that IP address here.
3-13