Summary of Contents for ZyXEL Communications Prestige 650M-6X
Page 1
Prestige 650M-6x Quick Start Guide PORT CONNECTION Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire). Connect the micro filter(s) (optional – see the appendix in your User’s Guide for details) between the wall jack and your telephone(s).
COLOR STATUS DESCRIPTION 10/100M Green The Prestige has a successful 10Mbps Ethernet connection. Blinking The Prestige is receiving or sending data. Amber The Prestige has a successful 100Mbps Ethernet connection. Blinking The Prestige is receiving or sending data. The LAN is not connected. Green The Prestige is linked successfully to a DSLAM.
b. Select Protocol and then click Add. Select Microsoft from the list of manufacturers. d. Select TCP/IP from the list of network protocols and then click OK. Configuring TCP/IP 1. In the Network window Configuration tab, select your network adapter’s TCP/IP entry and click Properties. 2.
As you type a password, the screen displays an asterisk “ * ” for each character you type. Password: **** Copyright (c) 1994 - 2004 ZyXEL Communications Corp. ras> You can configure two PVCs, node 1 or node 2 by using the following commands. See your User’s Guide for detailed information.
Page 5
For your safety, be sure to read and follow all warning notices and instructions. To reduce the risk of fire, use only No. 26 AWG or larger telephone wire. Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks.