If the transmitter is set up to have readout or output of combustibles or maximum carbon
dioxide, then the fuel constituents must be entered. Any or all of the variables can be
modified and entered in set-up steps 39 to 45 and 46 to 51. (Refer to Section 5.5). Your
fuel supplier or chemist should be able to give you all these values.
A
H
O
N
S
M
81
APPENDIX 1
CONSTITUENT VALUES FOR FUELS
is the heat of combustion of the fuel per gram atom of contained
carbon.
is the H/C atom ratio in the fuel.
is the O/C atom ratio in the fuel.
is the N/C atom ratio in the fuel.
is the S/C atom ratio in the fuel.
is the ratio of H 2 O molecules to C atoms in the fuel
9060-Zirconia Analyser
81