Operational Theory 2; Introduction; Micro-Fuel Cell Sensor; Principles Of Operation - Teledyne 3000TA Operating Instructions Manual

Trace Oxygen Analyzer
2.1
The analyzer is composed of three subsystems:

1. Micro-Fuel Cell Sensor

2. Sample System
3. Electronic Signal Processing, Display and Control
The sample system is designed to accept the sample gas and transport
it through the analyzer without contaminating or altering the sample prior
to analysis. The Micro-Fuel Cell is an electrochemical galvanic device that
translates the amount of oxygen present in the sample into an electrical
current. The electronic signal processing, display and control subsystem
simplifies operation of the analyzer and accurately processes the sampled
data. The microprocessor controls all signal processing, input/output and
display functions for the analyzer.
2.2

2.2.1 Principles of Operation

The oxygen sensor used in the Model 3000T series is a Micro-Fuel
Cell designed and manufactured by Analytical Instruments. It is a sealed
plastic disposable electrochemical transducer.
The active components of the Micro-Fuel Cell are a cathode, an anode,
and the 15% aqueous KOH electrolyte in which they are immersed. The cell
converts the energy from a chemical reaction into an electrical current in
an external electrical circuit. Its action is similar to that of a battery.
There is, however, an important difference in the operation of a
battery as compared to the Micro-Fuel Cell: In the battery, all reactants are
stored within the cell, whereas in the Micro-Fuel Cell, one of the reactants
Operational Theory

Introduction

Micro-Fuel Cell Sensor
Teledyne Analytical Instruments

Operational Theory 2

2-1