Sharp SF-2530 Operation Manual page 44

AUDITING PROGRAMS
Program No. 15: Resetting account
Program No. 15 is used to reset all accounts or to reset any desired
individual accounts. When program No. 15 is entered, "0" will blink on
the right side of the copy quantity display.
POWER SAVE
3
1 2
4 5 6
7 8 9
0 C
POWER SAVE
ZOOM
100%
Program No. 16: Auditor code change
See page 37, Auditor code number.
42
1. To reset an individual account, press key 0 on the 10-key
pad.
To reset all accounts, press key 1.
START
2. Press the START key.
If you have pressed key 0 in step 1, an account number will
appear in the copy quantity display. Proceed to step 3.
If you have pressed key 1, the number of copies against all
account numbers will be reset. Proceed to step 5.
3. Use a ZOOM (
number to be reset.
START
4. Press the START key.
The number of copies against the specified account number will
be reset.
5. To continue with the same or other auditing programs,
enter the desired program number. To exit the auditing
program mode, press the
, ) key to select the account
key.