Sharp SF-2530 Operation Manual page 37

R
TRAY SELECT
1 2 3
4 5 6
7 8 9
0 C
START
Setting the user programs
1 Press and hold the TRAY SELECT key for more than 5
seconds until all the alarm indicators* blink and "– –"
appears in the copy quantity display.
* The alarm indicators are the
indicators.
Enter a program number using the 10-key pad.
2
The selected program number will blink in the copy quantity
display.
If a mistake is made in steps 2 to 4, press the clear (
You will return to step 2.
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off
timer, press key 3.
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Auto power save control
Stream feeding mode
Override sorter bin capacity limit
Sorter bin access mode
Auto paper select mode
Auto power shut-off setting
3 Press the START key.
The entered program number will be steadily lit on the left side
of the copy quantity display and the currently selected parameter
number for the program will blink on the right side.
USER PROGRAMS
, , , , and
) key.
C
Program No.
1
2
3
4
5
6
7
8
9
35