Sharp SF-2530 Operation Manual page 2

The power switch positions are marked "I" to indicate power "ON" and
" " to indicate stand-by.
In the stand-by position, power is being supplied to a drying heater within
the optical system of the copier.
Caution:
For complete electrical disconnection, pull out the main plug.
The equipment should be installed near an accessible socket outlet for
easy disconnection.
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference the
copier's serial number located on the right hand side at the rear bottom
corner of the copier.
SF-2530
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Sharp Copier
Service Department Number